Wireless Access

last person joined: 2 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

Is there any single command to show configuration for all nodes from Mobility Master?

  • 1.  Is there any single command to show configuration for all nodes from Mobility Master?

    Posted 11 days ago
    When connected to Mobility Master, is there any single command to show configuration for /md and all folder/nodes under it? I want to take backup of configuration using one command only instead of moving between nodes/folder to collect configuration at every level. 

    Thank you,

    ------------------------------
    Ahmad Enaya
    ------------------------------


  • 2.  RE: Is there any single command to show configuration for all nodes from Mobility Master?

    Posted 11 days ago
    No single command to show config at each level. Are you not able to backup the MM to a TFTP/FTP or other external server? The flashbackup of the MM will include the config at each level below. See the screenshot below. There will be a config file for each level below including the settings that differ from the levels above.




    ------------------------------
    Dustin Burns
    ------------------------------



  • 3.  RE: Is there any single command to show configuration for all nodes from Mobility Master?

    Posted 11 days ago
    To be clear, the backup configuration dialog on the MM will backup the entire config in a configbackup.tar.gz file.



    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------