Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

My RAP External IP problem

This thread has been viewed 6 times

  • 1.  My RAP External IP problem

    Posted Dec 07, 2021 12:02 PM
    Hello, everybody.

    I'm attempting to set up RAP VPNs on a cluster that includes two mobility controllers and a mobility master. The external addresses for the two Managed Devices in the cluster appear to be missing from the cluster profile. Unfortunately, there doesn't seem to be a way to connect the RAP External IPs to the cluster participants. I tried removing and re-adding the members with the RAP External IPs, but it didn't work.

    Can you guys give me a solution?

    ------------------------------
    john tillman
    ------------------------------


  • 2.  RE: My RAP External IP problem

    MVP GURU
    Posted Dec 07, 2021 12:46 PM
    You will need to make sure the RAP IPs configured in your cluster profiles are set to the external IP, otherwise the AP will get the inner IP and try to connect to that. Take a look at this blog that Florian Baaske created a while back. Lots of good information in there:

    https://www.flomain.de/2019/05/basic-rap-setup-with-arubaos-8/

    ------------------------------
    Dustin Burns
    Lead Mobility Engineer @WEI

    ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
    If my post was useful accept solution and/or give kudos
    ------------------------------

    Original Message