Aruba Airwave

last person joined: 10 minutes ago 

Configure Snmpv3 in template ZTP

This thread has been viewed 17 times
  • 1.  Configure Snmpv3 in template ZTP

    Posted Feb 24, 2021 09:09 AM

    I configured template for 2930F in airwave, my problem is in snmpv3, the user was created but on my switch I always the same error :

    W 02/24/21 14:17:36 00236 snmp: Security access violation from for
    the community name or user name : CNAVSNMPV3

    If, I add the snmpv3 user command with sha and priv key in clear, the switch will be  Up in Airwave.

    But, I will deploy 200 switch and I search the good configuration in ZTP to deploy the same snmpv3 configuration, what is the best solution ?

    snmp configuration in my template :

    snmp-server community "public" operator
    snmp-server community "CNAV" unrestricted
    snmp-server host community "CNAV"
    snmpv3 engineid %snmpv3_engineid%
    snmpv3 enable
    snmpv3 restricted-access
    snmpv3 group managerpriv user "CNAVSNMPV3" sec-model ver3
    snmpv3 user "CNAVSNMPV3" auth sha "37b3c9790811c131c1103f523ce1fd4881081f0b" priv aes "63c2ef1ea079f33469b3b295f7160a21"