Cloud Managed Networks

last person joined: yesterday 

Forum to discuss all things Aruba Central and UXI Network Management, this includes Aruba Central managed networks, Central configuration, best practices, Central APIs, Cloud Guest, AIOps, Presence Analytics and Other Central Applications
Expand all | Collapse all

Instant AP settings

This thread has been viewed 17 times
  • 1.  Instant AP settings

    Posted Jul 14, 2021 12:11 PM
    Hi there. 
    Does anyone know anything about the following for Access Point and Radio settings?
    What do they mean and what the best settings should be?
    Background Spectrum Monitoring = On or Off ? 
    Channel Quality Threshold = ? …. Channel Quality Wait time = ?  ... what is the recommendation?
    Smart Antenna = On or Off ? 

    Thanks in advance.

    ------------------------------
    Kianoosh Nazem
    ------------------------------


  • 2.  RE: Instant AP settings

    Posted Jul 14, 2021 11:54 PM
    you can check this URL to get some explanation
    https://www.arubanetworks.com/techdocs/Instant_87_WebHelp/Content/instant-ug/arm/conf-radio-sett.htm?Highlight=%22Channel%20Quality%20Threshold%22

    smart antenna are used in only IAP-335s so if you don't have that, don't use it.
    i would leave the channel quality , etc to their default value and only change base don recommendation from TAC.
    but here you can find what they mean.
    https://www.arubanetworks.com/techdocs/CLI-Bank/Content/aos8/rf-arm-pro.htm?Highlight=Channel%20Quality%20threshold

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
    ------------------------------



  • 3.  RE: Instant AP settings

    Posted Jul 15, 2021 04:14 AM
    Also, don't forget to look at the Instant Validated Reference Design Guide as these give you the best practice as to when to enable/disable the settings.



    ------------------------------
    Craig Syme
    ------------------------------