Primary (K-12) Education

We have quite a few Samsung Flip WM75A interactive screens in our classrooms.  These devices support enterprise wireless and authentication/certificates and seem to behave well on the network. The one question we have is trying to figure out what Samsung Smartview+ actually is... When looking at our AirGroups it would appear that it is showing up as DLNA media and DIAL (as well as Airplay).  But we can not seem to actually get anything to connect using the "Samsung Flip" App that apparently uses this "Smartview+" technology... Obviously we have other ways to connect (miracast, airplay, wired) but it would be nice to also be able to use Samsung's own app.

Does anyone have any experience with this?

Thanks,
Dan

------------------------------
Daniel Baker
------------------------------

I'm not sure if it applies in your situation but we found that casting media was rendered inoperable if we enabled `broadcast-filter arp` on the ssid-profile

------------------------------
Jo McGhee
------------------------------

Original Message:
Sent: Apr 21, 2022 12:36 PM
From: Daniel Baker
Subject: Samsung Smartview+ screen sharing

We have quite a few Samsung Flip WM75A interactive screens in our classrooms.  These devices support enterprise wireless and authentication/certificates and seem to behave well on the network. The one question we have is trying to figure out what Samsung Smartview+ actually is... When looking at our AirGroups it would appear that it is showing up as DLNA media and DIAL (as well as Airplay).  But we can not seem to actually get anything to connect using the "Samsung Flip" App that apparently uses this "Smartview+" technology... Obviously we have other ways to connect (miracast, airplay, wired) but it would be nice to also be able to use Samsung's own app.

Does anyone have any experience with this?

Thanks,
Dan

------------------------------
Daniel Baker
------------------------------

I figured it out... though the devices are broadcasting DLNA and DIAL they are actually direct IP.  In the infinite wisdom of poor programming decisions it appears that the "code" used to connect is simply the last octet of the IP address.  Hence the app will fail to connect if on a different network.  The workaround is to simply put the entire IP address in the mobile app and it works.

It would be great if there was just a single standard for wireless screen sharing that everyone used :)

------------------------------
Daniel Baker
------------------------------

Original Message:
Sent: Apr 22, 2022 08:41 AM
From: Jo McGhee
Subject: Samsung Smartview+ screen sharing

I'm not sure if it applies in your situation but we found that casting media was rendered inoperable if we enabled `broadcast-filter arp` on the ssid-profile

------------------------------
Jo McGhee

Original Message:
Sent: Apr 21, 2022 12:36 PM
From: Daniel Baker
Subject: Samsung Smartview+ screen sharing

We have quite a few Samsung Flip WM75A interactive screens in our classrooms.  These devices support enterprise wireless and authentication/certificates and seem to behave well on the network. The one question we have is trying to figure out what Samsung Smartview+ actually is... When looking at our AirGroups it would appear that it is showing up as DLNA media and DIAL (as well as Airplay).  But we can not seem to actually get anything to connect using the "Samsung Flip" App that apparently uses this "Smartview+" technology... Obviously we have other ways to connect (miracast, airplay, wired) but it would be nice to also be able to use Samsung's own app.

Does anyone have any experience with this?

Thanks,
Dan

------------------------------
Daniel Baker
------------------------------