Controllerless Networks

last person joined: 8 hours ago 

Aruba Instant Wi-Fi: Meet the controllerless Wi-Fi solution that's easy to set-up, is loaded with security and smarts, and won't break your budget.
Expand all | Collapse all

IAP Configuration

  • 1.  IAP Configuration

    Posted 28 days ago
    Hi everyone,

    Could any one help me with the steps, not any VRD or guide, to setup an IAP with the switch.

    What port configuration should be done in the switch. if the AP is currently working as an RAP and i want to make it an IAP for temporary time with initial configuration and provisioning steps.

    Thank you

    ------------------------------
    joxor
    ------------------------------


  • 2.  RE: IAP Configuration

    Posted 27 days ago
    For an IAP, the switch configuration would be defined as a trunk port. The untagged VLAN would be the IAPs management VLAN (where the IAP obtains an IP address for management) and the tagged VLANs would be your client VLANs.

    e.g

    VLAN10 = Untagged = IAP Mgmt
    VLAN20 = Tagged = Corporate WLAN
    VLAN30 = Tagged = Guest WLAN

    ------------------------------
    Craig Syme
    ------------------------------



  • 3.  RE: IAP Configuration

    Posted 27 days ago
    Thank you @Craig Syme

    Could you also help me with the steps for initial provision and configuration. 

    Regards, 
    1. Joxor


    ------------------------------
    Sayan Roy Chowdhury
    ------------------------------



  • 4.  RE: IAP Configuration

    Posted 27 days ago
    The provision of the switch port? That all depends on the switch model :) For example, a AOS-SW switch...

    interface 4
    name "ArubaIAP"
    tagged vlan 200
    untagged vlan 1
    exit

    Here's the initial provisioning info for setting up an IAP

    https://www.arubanetworks.com/techdocs/Instant_86_WebHelp/Content/instant-ug/prov-iap/setup-iap.htm

    ------------------------------
    Craig Syme
    ------------------------------