Network Management

Probably there isn't (on AOS-S), I mean...a show interface brief should show you the physical ethernet interfaces belonging to ...

Ah, OK, that makes a whole lot more sense, and was not clear from the doc or the inline help. There is a significant documentation ...

For reference, have a look at latest HPE IMC and Aruba OS-CX Switches Configuration Guide IMC 7.3 (E0710P06 edition) published ...

Hi Robers, Thanks, i found related information , i will try.

Hi! VSX technology supports two (and two only) switches: one with the role of VSX Primary and one with the role of VSX Secondary. ...

That you can't reach from the ISP VLAN to the LAN segments probably has to do with the NAT configuration on your router. The ISP ...

I normally don't use routed interfaces, instead create a VLAN and configure that as access vlan on the interface (switching/non-routing ...

Hi Lars. Yes, this is expected. There is no OUT option on 2530. Only IN option is available. HP-2530-24G-PoEP(eth-5)# ...

Understood with Out of Support, its on our Agenda. So I try to get a quick win, since our Machines are getting Full of devices, ...

If there is a DHCP scope defined for the subnet where the ip helper is in, that should just work. Probably in the past you had ...