Wireless Access

All APs were upgraded to 10.7.1.1_92045. I am still experiencing client reject issues with AP not allowing client associations. ...

The cisco bug was causing some of our wireless users to get APIPA addresses...we are actively working moving to a Cisco Catalyst ...

Three locations to worry about: AP native VLAN, configured within the ap system profile. The AP by default will use the native ...

CPsec is already disabled. I have three APs, and one of them can successfully join the AC, but the other two are showing this ...

I have opened a support case and will update this threat when I have a bit more clarity.

If the client MAC address is displayed in the correct VLAN in the switch, then the gateway has done its job successfully. Have ...

There are various reasons for dropped connections and very slow speeds You can check the settings like SSID Datarates, Interference, ...

You are correct, I apologize for the incorrect directions. The access control will add the other services that are already pre-built ...

New Central alerts are real one. 19% drops is not good number. If you use 1G uplinks to APs then this will affect also your WiFi ...

When configuring Spectrum Mode on Aruba access points (as seen in your screenshot under 2.4 GHz radio profile: SE-24 ), enabling ...