Wired Intelligent Edge

Improve your networking skills with the AOS-CX Switch Simulator AOS-CX is the operating system running in Aruba CX Switches. ...

Hi Thomas Thanks for your reply. I had thought of and wanted to propose AG for ATOR-1&2 with AG1 and BTOR-1&2 with AG2 and have ...

Good Day, Aruba 2930f switch - ACL I need to be able to block certain vlans from communicating to a specific server IP ...

We had a similar experience. Upgrading two 6410 switches with an EVPN connection between them from version 10.11.1021 to version ...

We used the guide that Herman mentioned, but I would suggest creating a spreadsheet that has your entire config. Use another column ...

:-) Yes this was my first example I have in mind when I wrote my previous response. So You need to hunt down where DHCP response ...

Like the title says, I'm unable to save the dhcp snooping database when only the oobm interface has an IPv4 address. This works ...

Excellent. It says it's in-sync. We'll see how this goes! Thanks so much :)

i had issues like this with a 6300M and a 6400 series chassis. What worked for me was using a USB(A) to USB (C) cable, instead ...

Okay, then it's like I thought it should be. I did not succeed to reproduce issue after I updated cx fw from 10.13.1040 to 10.13.1070 ...