Become a Member
Technical discussions may include abbreviated and/or legacy terminology for HPE Aruba Networking products. Refer to https://www.arubanetworks.com for current and complete HPE Aruba Networking product lines and names.
This looks like flash config failure. You can do a workaround and manually upgrade partition 1 to Campus image. This will remove ...
Hi Luis, could you solve your issues? I have exactly the same problem. Thanks and regards. Jürgen
I feel DHCP would avoid this extra hassle. I don't feel static assignment is necessary or the best.
Good to hear and Congrats in finding the solution! Be sure to post your request in the correct group next time. You postet it ...
My thoughts: Use DCHP instead of static addressing (to avoid the subnet hassle you dealt with). Use hardware reservations ...
Do you see this behaviour immediately using CLI on the IAP? also check the output of "show log user 20" and "show log sec 20" ...
With Instant this would need to be accomplished by a combination of client isolation (deny inter user bridging and local routing) ...
The controller logs may provide an indication, and if not you may try to enable verbose or debug logging on the authentication ...
Check this post . Note that by deleting the wrong files, you may break the controller even further. The mentioned commands "tar ...
Maybe the AP-503 is an idea? Supported, updates available, reasonable price. ------------------------------ Marcel Koedijk | ...
Either the content you're seeking doesn't exist or it requires proper authentication before viewing.