Become a Member
The resource assets in this website may include abbreviated and/or legacy terminology for HPE Aruba Networking products. See www.hpe.com for current and complete HPE Aruba Networking product lines and names.
ok this error means that the SSL connection cannot be setup, generally this is resolved by changing firewalls to allow the switches ...
How is the cluster configured? Is it in Load-sharing, or you have the 1st Controller anchoring all the devices and the 2nd controller ...
The easy way to do site survey with AOS 10 AP in Central is to create a survey SSID profile using bridge forwarding mode, ...
Do you see problems with connected clients or other problems? To 'resolve' this, probably best to open a TAC support case to ...
Aruba Unified APs like AP-5xx offer flexible deployment options and support both controller-based and controller-less (Instant) ...
I got corrected on that point; with AOS10 apparently the certificate only needs to be on the AP. And you are right that if it ...
Hi all, sorry for the late answer: l ogin to the Aruba Gateway CLI and get the output for "show user-table" I ...
First you need to have both APs on the same vlan so they are able to form the Instant cluster. Disable extended SSID under System ...
Here is a good description of how Aruba AP wired ports work. Check what VLANs are enabled on uplink ports and remove all unwanted ...
see if you can use 10.4.1.8 and test. ------------------------------ If my post was useful accept solution and/or give kudos. ...