Wireless Access

Hi all,

I have a production enviroment where some UV lamps is generation noise on the 2,4 ghz area and shielding those it not really an option :(

I have forced 5ghz on specific "voice SSIDs", but I was wondering if I could disable/turn off 2,4 ghz "per AP level"? -And where in AOS?

Any suggestions for other alternatives?

At the moment, the impacted AP's topping at 95-98% of interference.

Setup it two 7205 controllers running 8.2.1.0

Best regards,

You can turn this off at the VAP level (Virtual AP -> Allowed Band) or at a radio level (configure the 802.11g radio profile Mode to be "am-mode".

So you mean in Configuration=>System=>Profiles=>Wireless LAN=>Virtual AP=> for the "allowed band"

And

Configuration=>System=>Profiles=>RD Management=>2.4 ghz radio (But which profile??)