Wired Intelligent Edge

 View Only

  • 1.  2530 YA or YB firmware

    Posted Jul 24, 2019 02:55 PM
      |   view attached

    I've never noticed that there are YA and YB firmwares.

     

    I couldn't find what is the difference.

     

     



  • 2.  RE: 2530 YA or YB firmware

    Posted Jul 25, 2019 04:25 AM

    That's correct. Below you'll find a list of SKU's supported by which software:

     

    “YA” software is for the following 2530 skus: J9772A, J9773A, J9774A, J9775A, J9776A, J9777A, J9778A, and J9781A

     

    “YB” software is for the following 2530 skus: J9779A, J9780A, J9782A, J9783A, and JL070A

     

    Hope this will support you!



  • 3.  RE: 2530 YA or YB firmware

    Posted Jul 25, 2019 04:48 AM

    Also, the release notes mention which switch type needs which firmware. All gigabit switches use YA, and if you do a 'show version' on your switch you can see the 'family':

    sw01# show version

Image stamp:    /ws/swbuildm/rel_yakima_qaoff/code/build/lvm(swbuildm_rel_yakima_qaoff_rel_yakima)
                Feb 27 2019 22:59:29
                WC.16.08.0002
                422
Boot Image:     Primary

Boot ROM Version:    WC.16.01.0006
Active Boot ROM:     Primary

    The example above is a 2930F. On your switch, you will see YA or YB. Then take that version for the firmware to upload.



Related Content