Wired Intelligent Edge

 View Only
  • 1.  2930F VSF

    Posted Jun 07, 2018 07:08 AM

    Hello Everyone,

    I am trying to perform VRF on Aruba 2930F.
    However Iam getting the following error.

    VSF port failure on link 1 port 1/51: 

    Peer port 52 is not VSF enabled


    ST1-CMDR: VSF port 1/51 is in error state

    ----  Bottom of Log : Events Listed = 255  ----

     




    Can you provide an solution for the same. Thanks in advance.



  • 2.  RE: 2930F VSF

    Posted Jun 07, 2018 11:29 AM

    Greetings!

     

    What version of software are you running on each 2930F?  Also, is there an existing configuration on the switch you're trying to add to the VSF fabric?



  • 3.  RE: 2930F VSF

    Posted Jun 07, 2018 11:44 AM
    Hi Mathew,

    Thanks for your response.
    This is the version WC.16.04.0008
    There is no existing configuration on the switches.

    Regards,
    Haresh Niwate


  • 4.  RE: 2930F VSF

    Posted Jun 08, 2018 08:16 AM

    Hello everyone,

    I just performed reset on the second switch using the following commands and later vsf worked as expected.

     

    reset system configuration
    reload

    Regards,
    Haresh Niwate