Comware

 View Only

3COM 4200G scripting

This thread has been viewed 0 times
  • 1.  3COM 4200G scripting

    Posted Mar 13, 2012 10:33 AM

    Hi,

     

    I'm trying to automate some of our switch maintenance processes and one thing I would like to do is to automatically download the switch config file. I've noticed you can do this:

     

    ssh admin@my-4200-switch "display ?"

     

    and it returns with the output from the display ? command. As this keeps pausing I'd like to change the screen length to 0. But only for the download session, not permanently. So how can I run more than one command via SSH, and specifically how can I run this sequence:

     

    sys
    user-interface aux 0
    screen-length 0
    quit
    quit
    display current-configuration
    sys
    user-interface aux 0
    screen-length 24
    quit
    quit

    Any help appreciated.

     

    Phil

     

     

    This is the switch:

     

    <4210>dis ver
    3Com Corporation
    3Com Switch 4210 9-Port Software Version 3.10 Release 2212P01
    Copyright (c) 2004-2010 3Com Corporation and its licensors, All rights reserved.
    3Com Switch 4210 9-Port uptime is 3 weeks, 4 days, 0 hour, 7 minutes

    3Com Switch 4210 9-Port with 1 Processor
    64M     bytes SDRAM
    8M      bytes Flash Memory
    Config Register points to FLASH

    Hardware Version is REV.D
    Bootrom Version is 610
    [Subslot 0]  8FE+1Combo SFP  Hardware Version is REV.D