Comware

 View Only
  • 1.  5500 Stacking distance

    Posted Feb 24, 2010 06:08 AM

    dear.



    i am traying to put 6 X 5500 switch in stack using 1G fiber ports as the stacking port.



    can you please tell me what is the max distance between each 5500 switch support in 3Com.



     



     



    thank you





  • 2.  RE: 5500 Stacking distance

    Posted Feb 26, 2010 06:42 AM

    Hi,



    I think 5500 must be stacked with a specif rear cable (maximum 5 meters).



    I you use a fiber,  swicthes are'nt in a stack but uplinked.



    Bye.



     



     





  • 3.  RE: 5500 Stacking distance

    Posted Mar 22, 2010 10:35 PM

    HI,



    please check this port upgrade, if you product support the SFP module :



    CODE. 3CSFP91 from 2 to 220 meter



    CODE. 3CSFP92 from 2 to 550 meter



    CODE. 3CSFP97 from 2 to 70 Km



    remember to check if your product support all this module, refer to the datasheet of your switch.



     



     



    This message was edited by xabarax on 3-22-10 @ 7:36 PM


  • 4.  RE: 5500 Stacking distance

    Posted Mar 22, 2010 11:07 PM

    it is 5500-EI right ? not 5500G-EI ?



     



    5500-EI stack distance is specified by SFP module, if you running 70KM-SFP, so you can stack over 70Km distance



     



    5500G-EI (giga) max stack distance is about 5 meters