Wireless Access

Folks, greetings.

Is there any way to independently configure Tx Power for the 5GHz radio? I mean using a min/max for each band, not having to have the same min/max for both 2.4GHz and 5GHz radios.

Apparently it can be done by configuring each AP individually. It does not help, as we would not have a min/max range and would have to keep the channel fixed.

Environment:
60 IAP 305
Version: 8.4.0.0

Any suggestion?

Regards,

AL

You can:  https://www.arubanetworks.com/techdocs/Instant_83_WebHelp/Content/Instant_UG/ARM/Configuring_Radio_Settings.htm

Hi cjoseph, thanks for your reply.

I would need to create a profile, with a zone and then tie the SSID to that zone?

The question may sound silly, but I am more used with another vendor and for me Aruba is completely new.

Thanks again.

AL

Under RF > ARM there should be a setting that applies to the 5ghz band range for all access points.  The link before is if you want it to apply to separate groups of access points.