You should check the release notes for the version you plan to move to and see if there are any required intermediate steps listed there. I don't see any for 10.14, so you probably can upgrade directly, but read the release notes for possible other things that you need to be aware of.
Also Central should prevent you from doing incompatible upgrades.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Sep 17, 2024 08:56 PM
From: ReeceB
Subject: 6200 upgrade path from 10.10.1040 to 10.14.1000
Greetings,
Very much a newbie here, so apologies in advance.
I have a fleet of approx 60 switches, currently running PL.10.10.1040 (or close to that variant) and need to go to 10.14.1000 to resolve a known issue.
I have an outstanding issue re using Central to perform the upgrade, but I'm wanting to know if there are any intermediate upgrades that need to be done, seeing as I ama going from major version 10.10.xx to 10.14.xx (should I need to do it manually).
Appreciate your assistance.
------------------------------
Reece B
QLD, Australia
------------------------------