Wireless Access

 View Only
  • 1.  6GHz Spectrum Analysis

    Posted 29 days ago

    Hello Folks.

    Trying to setup Spectrum Analysis.

    Noticed that when I launched the tool, only 2.4G and 5G show up as Available Sensors even though I configured 2.4/5/6GHz as Spectrum mode on my AP-635

    Is there anything else I need to enable to get 6GHz working?

    ========

    rf dot11a-radio-profile "SE-5G" 
        mode spectrum-mode                             
        max-channel-bandwidth 40MHz 
        min-channel-bandwidth 40MHz 
        
    rf dot11-6GHz-radio-profile "SE-6G" 
        mode spectrum-mode 
        max-channel-bandwidth 40MHz 
        min-channel-bandwidth 40MHz 

    rf dot11g-radio-profile "SE-24" 
        mode spectrum-mode

    ap-group "AG-Spectrum" 
        dot11a-radio-profile "SE-5G" 
        dot11g-radio-profile "SE-24" 
        dot11-6GHz-radio-profile "SE-6G" 

    =======

    Thanks,

    Alex



  • 2.  RE: 6GHz Spectrum Analysis

    Posted 28 days ago

    What version?

    https://www.arubanetworks.com/techdocs/ArubaOS/Consolidated_8.x_RN/Content/8.10/overview-8100x.htm



    ------------------------------
    Carson Hulcher, ACEX#110
    ------------------------------



  • 3.  RE: 6GHz Spectrum Analysis

    Posted 28 days ago

    We are running AOS 8.12.0.0-FIPS

    Thanks,

    Alex




  • 4.  RE: 6GHz Spectrum Analysis

    Posted 28 days ago

    Did some more digging, support was added for spectrum analysis on the 2.4 GHz and 5 GHz bands with 8.12, support for 6 GHz won't be coming to AOS 8 at this time.



    ------------------------------
    Carson Hulcher, ACEX#110
    ------------------------------



  • 5.  RE: 6GHz Spectrum Analysis

    Posted 28 days ago

    Thanks for looking into this.

    Alex