Dear Support Team,
I need some help regarding Aruba controller. The controllers are very slow both the webui and the cli. When I try to give a show command the system isn't response.
Please see below the exactly error message:
(standby node) #show run
Building Configuration...
Module Configuration Manager is busy. Please try later
I try to upgrade the system to the latest OS but I can't issue the write memory command before the upgrade and I can't backup the system. While I can't issue the write memory command I don't want to restart the system because the startup config and the running config is not the same.
What could be the problem?
soma additional information:
We have two controller, one of the controller is the active node and
the other controller is the standby node.
On the active node, they saved the configuration succesfully, but the management is quite slow.
On the standby node, When I try to save the configuration they get some error messages (please see below and the attached screenshot (backup_error.png)).
(standby node) #backup flash
DB backup is currently in progress, please try again later.
Error shutting down DBBK DB
(standby node) #write memory
Saving Configuration...
Module Configuration Manager is busy. Please try later
(standby node) #copy running-config flash: runcfg.txt
Module Configuration Manager is busy. Please try later
And last but not at least the backup file size is three times more than it was earlier.
Thank you in advance for your reply.
Best regards,
Zs