Controllerless Networks

Has anybody else noticed the disappearance of eth0 network interface from IAP-315 statistics after upgrade to 8.10.0.17 LSR? At least IAP-515s are OK:

IAP-515:
Ethernet Duplex/Speed Settings
------------------------------
Autoneg  Speed (Mbps)  Duplex  Iface
-------  ------------  ------  -----
on       1000          Full    eth0
on       Unknown       Half    eth1

IAP-315:
Ethernet Duplex/Speed Settings
------------------------------
Autoneg  Speed (Mbps)  Duplex  Iface
-------  ------------  ------  -----
on       1000          Full    bond0

                                                                                  
515:
Wired Port Table
------------------
Port  State  Type  Bonding(Admin/Oper/Active)
----  -----  ----  --------------------------
eth0  UP     WAN   Yes/Yes/Yes
eth1  DOWN   LAN   No/No/No
end of show uplink status                            

315:
Wired Port Table
------------------
Port   State  Type  Bonding(Admin/Oper/Active)
----   -----  ----  --------------------------
bond0  UP     WAN   No/No/Yes
end of show uplink status

Uve

For most monitoring purposes the usage of bond0 vs eth0 on a single Ethernet AP is synonymous.

Has anybody else noticed the disappearance of eth0 network interface from IAP-315 statistics after upgrade to 8.10.0.17 LSR? At least IAP-515s are OK:

IAP-515:
Ethernet Duplex/Speed Settings
------------------------------
Autoneg  Speed (Mbps)  Duplex  Iface
-------  ------------  ------  -----
on       1000          Full    eth0
on       Unknown       Half    eth1

IAP-315:
Ethernet Duplex/Speed Settings
------------------------------
Autoneg  Speed (Mbps)  Duplex  Iface
-------  ------------  ------  -----
on       1000          Full    bond0

                                                                                  
515:
Wired Port Table
------------------
Port  State  Type  Bonding(Admin/Oper/Active)
----  -----  ----  --------------------------
eth0  UP     WAN   Yes/Yes/Yes
eth1  DOWN   LAN   No/No/No
end of show uplink status                            

315:
Wired Port Table
------------------
Port   State  Type  Bonding(Admin/Oper/Active)
----   -----  ----  --------------------------
bond0  UP     WAN   No/No/Yes
end of show uplink status

Uve

Thank you, Carson!

But even if we are talking about undocumented change/feature there's still the problem that we can't monitor IAP-315 ethernet interface by SNMP anymore:

IAP-315:

foo:~$ snmpwalk -v 3 XX.XX.XX.XX 1.3.6.1.2.1.1.1.0
iso.3.6.1.2.1.1.1.0 = STRING: "ArubaOS (MODEL: 315), Version 8.10.0.17-8.10.0.17 LSR"

foo:~$ snmpwalk -v 3 XX.XX.XX.XX 1.3.6.1.2.1.31.1.1.1.1
iso.3.6.1.2.1.31.1.1.1.1.50 = STRING: "radio0_ssid_id0"
iso.3.6.1.2.1.31.1.1.1.1.52 = STRING: "radio0_ssid_id2"
iso.3.6.1.2.1.31.1.1.1.1.53 = STRING: "radio0_ssid_id3"
iso.3.6.1.2.1.31.1.1.1.1.72 = STRING: "radio1_ssid_id2"
iso.3.6.1.2.1.31.1.1.1.1.73 = STRING: "radio1_ssid_id3"
iso.3.6.1.2.1.31.1.1.1.1.90 = STRING: "gre0"
iso.3.6.1.2.1.31.1.1.1.1.91 = STRING: "gre1"
iso.3.6.1.2.1.31.1.1.1.1.92 = STRING: "gre2"
iso.3.6.1.2.1.31.1.1.1.1.93 = STRING: "gre3"
iso.3.6.1.2.1.31.1.1.1.1.94 = STRING: "gre4"
iso.3.6.1.2.1.31.1.1.1.1.500 = STRING: "BR0"

foo:~$ snmpwalk -v 3 XX.XX.XX.XX  1.3.6.1.2.1.31.1.1.1.6
iso.3.6.1.2.1.31.1.1.1.6.50 = Counter64: 0
iso.3.6.1.2.1.31.1.1.1.6.52 = Counter64: 2747090805
iso.3.6.1.2.1.31.1.1.1.6.53 = Counter64: 1212273592
iso.3.6.1.2.1.31.1.1.1.6.72 = Counter64: 3856689668
iso.3.6.1.2.1.31.1.1.1.6.73 = Counter64: 1213958346
iso.3.6.1.2.1.31.1.1.1.6.90 = Counter64: 0
iso.3.6.1.2.1.31.1.1.1.6.91 = Counter64: 0
iso.3.6.1.2.1.31.1.1.1.6.92 = Counter64: 0
iso.3.6.1.2.1.31.1.1.1.6.93 = Counter64: 0
iso.3.6.1.2.1.31.1.1.1.6.94 = Counter64: 0
iso.3.6.1.2.1.31.1.1.1.6.500 = Counter64: 0

IAP-515:

foo:~$ snmpwalk -v 3 XX.XX.XX.YY 1.3.6.1.2.1.1.1.0
iso.3.6.1.2.1.1.1.0 = STRING: "ArubaOS (MODEL: 515), Version 8.10.0.17-8.10.0.17 LSR"

foo:~$ snmpwalk -v 3 XX.XX.XX.YY 1.3.6.1.2.1.31.1.1.1.1
iso.3.6.1.2.1.31.1.1.1.1.1 = STRING: "eth0"
iso.3.6.1.2.1.31.1.1.1.1.2 = STRING: "eth1"
iso.3.6.1.2.1.31.1.1.1.1.10 = STRING: "eth99"
iso.3.6.1.2.1.31.1.1.1.1.51 = STRING: "radio0_ssid_id1"
iso.3.6.1.2.1.31.1.1.1.1.52 = STRING: "radio0_ssid_id2"
iso.3.6.1.2.1.31.1.1.1.1.53 = STRING: "radio0_ssid_id3"
iso.3.6.1.2.1.31.1.1.1.1.72 = STRING: "radio1_ssid_id2"
iso.3.6.1.2.1.31.1.1.1.1.73 = STRING: "radio1_ssid_id3"
iso.3.6.1.2.1.31.1.1.1.1.90 = STRING: "gre0"
iso.3.6.1.2.1.31.1.1.1.1.91 = STRING: "gre1"
iso.3.6.1.2.1.31.1.1.1.1.92 = STRING: "gre2"
iso.3.6.1.2.1.31.1.1.1.1.93 = STRING: "gre3"
iso.3.6.1.2.1.31.1.1.1.1.94 = STRING: "gre4"
iso.3.6.1.2.1.31.1.1.1.1.499 = STRING: "VC"
iso.3.6.1.2.1.31.1.1.1.1.500 = STRING: "BR0"

foo:~$ snmpwalk -v 3 XX.XX.XX.YY 1.3.6.1.2.1.31.1.1.1.6
iso.3.6.1.2.1.31.1.1.1.6.1 = Counter64: 106840806505
iso.3.6.1.2.1.31.1.1.1.6.2 = Counter64: 0
iso.3.6.1.2.1.31.1.1.1.6.10 = Counter64: 0
iso.3.6.1.2.1.31.1.1.1.6.51 = Counter64: 0
iso.3.6.1.2.1.31.1.1.1.6.52 = Counter64: 69232537
iso.3.6.1.2.1.31.1.1.1.6.53 = Counter64: 128994007
iso.3.6.1.2.1.31.1.1.1.6.72 = Counter64: 112067354
iso.3.6.1.2.1.31.1.1.1.6.73 = Counter64: 313489711
iso.3.6.1.2.1.31.1.1.1.6.90 = Counter64: 0
iso.3.6.1.2.1.31.1.1.1.6.91 = Counter64: 0
iso.3.6.1.2.1.31.1.1.1.6.92 = Counter64: 0
iso.3.6.1.2.1.31.1.1.1.6.93 = Counter64: 0
iso.3.6.1.2.1.31.1.1.1.6.94 = Counter64: 0
iso.3.6.1.2.1.31.1.1.1.6.499 = Counter64: 0
iso.3.6.1.2.1.31.1.1.1.6.500 = Counter64: 0

Uve Lokk

For most monitoring purposes the usage of bond0 vs eth0 on a single Ethernet AP is synonymous.

Has anybody else noticed the disappearance of eth0 network interface from IAP-315 statistics after upgrade to 8.10.0.17 LSR? At least IAP-515s are OK:

IAP-515:
Ethernet Duplex/Speed Settings
------------------------------
Autoneg  Speed (Mbps)  Duplex  Iface
-------  ------------  ------  -----
on       1000          Full    eth0
on       Unknown       Half    eth1

IAP-315:
Ethernet Duplex/Speed Settings
------------------------------
Autoneg  Speed (Mbps)  Duplex  Iface
-------  ------------  ------  -----
on       1000          Full    bond0

                                                                                  
515:
Wired Port Table
------------------
Port  State  Type  Bonding(Admin/Oper/Active)
----  -----  ----  --------------------------
eth0  UP     WAN   Yes/Yes/Yes
eth1  DOWN   LAN   No/No/No
end of show uplink status                            

315:
Wired Port Table
------------------
Port   State  Type  Bonding(Admin/Oper/Active)
----   -----  ----  --------------------------
bond0  UP     WAN   No/No/Yes
end of show uplink status

Uve