Doing a bit of research on the forum for various AC AP's mesh support, you can find a bit of info about it not being supported yet. As I understand any mesh role for the AC AP's (22x, 20x, 27x) is not supported. Both for Controller and IAP version of them.
This was originally announced to come in Q3 2014 with the arrival of the 225, but I found a post saying the goal now was November/December 2014.
I have deployed a few solutions with 225 and 275, and they are really good. However I am sure many of us are waiting in anticipation for the mesh support on these. Especially for the 275/274 AP's it's a feature that is sorely missing at the moment. In my mind an outdoor AP is just as likely to be used in mesh of some form, as to be used as a standard AP.
Now my question is do you have any more info you can share with us on this matter?
For instance what software versions are you aiming for to introduce this feature, and is it truly November/December that is your goal for this feature introduction or is that incorrect?
It would also be nice if you are able to update the community about any big changes on the timeline for this feature.
#AP225