Having problems with some fiber to a particular closet and I'm curious if it's possible to trigger an Airwave alert on low fiber Tx/Rx threshold from a 2920 switch?
I can log into switch and see things like voltage and tx/rx power status. (below).
IDF22_HP3800-24# sho interfaces transceiver 25 detail
Transceiver in 25
Interface Index : 25
Type : SFP+LR
Model : J9151A
Connector Type : LC
Wavelength : 1310nm
Transfer Distance : 10.0km (9um),
Diagnostic Support : DOM
Serial Number : Blahblahblah
Status
Temperature : 53.117C
Voltage : 3.2668V
Tx Bias : 38.442mA
Tx Power : 0.4955mW, -3.050dBm
Rx Power : 0.4324mW, -3.641dBm
Time Stamp : Wed Feb 6 11:43:58 2019
What I would like to do is have the switch send a trap to airwave if voltage, tx/rx power drops below threshold but I"m just not finding it in ssh session no matter how many ? marks I throw at it.
If it is possible, the very next question would be what an exceptable range would be. Would there be a difference between LRM and LR? Between 1G and 10G?
Any info appreciated. Thanks guys !!!