AOS-CX Simulator Lab- Quick Checklist!
Once you load readymade EVE-NG lab (UNI file) on to your EVE environment, please check VPCS ip addresses.
Please configure respective ip address after check show running configuration on connected CX device.
Step1 on VPCS:

Step2: Check connected vlan IP address on AOS-CX switch as below:

Step3: Configure right IP address on VPCS as below:

Step4: Confirm same using packet capture on AOS-CX:

Above QuickChecklist will help labs like below, where we make use of clients as VPCS.
Good day!
------------------------------
Yash NN
------------------------------