Wireless Access

We need to provide the dimensions of this mounting kit to our elevator contractor so they can layout the mounting points on the elevator while waiting for the devices to arrive but we could not find any documentation or template for AP-270-MNT-H2. we could only find dimensions for AP-270-MNT-H1 and AP-270-MNT-H3. why would aruba not provide this information?

Units are in millimeters.

We need to provide the dimensions of this mounting kit to our elevator contractor so they can layout the mounting points on the elevator while waiting for the devices to arrive but we could not find any documentation or template for AP-270-MNT-H2. we could only find dimensions for AP-270-MNT-H1 and AP-270-MNT-H3. why would aruba not provide this information?

The outside dimensions does not match the data sheet. in the data sheet it is 6.25x5 inches (158.75x127 mm).

Units are in millimeters.

We need to provide the dimensions of this mounting kit to our elevator contractor so they can layout the mounting points on the elevator while waiting for the devices to arrive but we could not find any documentation or template for AP-270-MNT-H2. we could only find dimensions for AP-270-MNT-H1 and AP-270-MNT-H3. why would aruba not provide this information?

Considering those details aren't from HPE, I'd not count on them being correct...nor does the mounting hardware have a processor.  Pretty sure those are the dimensions for the box.

The outside dimensions does not match the data sheet. in the data sheet it is 6.25x5 inches (158.75x127 mm).

Units are in millimeters.

We need to provide the dimensions of this mounting kit to our elevator contractor so they can layout the mounting points on the elevator while waiting for the devices to arrive but we could not find any documentation or template for AP-270-MNT-H2. we could only find dimensions for AP-270-MNT-H1 and AP-270-MNT-H3. why would aruba not provide this information?

Yeah i cant confirm it ether. only the installation guide is available from Aruba and it has no dimensions too. 

Considering those details aren't from HPE, I'd not count on them being correct...nor does the mounting hardware have a processor.  Pretty sure those are the dimensions for the box.

The outside dimensions does not match the data sheet. in the data sheet it is 6.25x5 inches (158.75x127 mm).

Units are in millimeters.

We need to provide the dimensions of this mounting kit to our elevator contractor so they can layout the mounting points on the elevator while waiting for the devices to arrive but we could not find any documentation or template for AP-270-MNT-H2. we could only find dimensions for AP-270-MNT-H1 and AP-270-MNT-H3. why would aruba not provide this information?

Yeah i cant confirm it ether. only the installation guide is available from Aruba and it has no dimensions too. 

Considering those details aren't from HPE, I'd not count on them being correct...nor does the mounting hardware have a processor.  Pretty sure those are the dimensions for the box.

The outside dimensions does not match the data sheet. in the data sheet it is 6.25x5 inches (158.75x127 mm).

Units are in millimeters.

We need to provide the dimensions of this mounting kit to our elevator contractor so they can layout the mounting points on the elevator while waiting for the devices to arrive but we could not find any documentation or template for AP-270-MNT-H2. we could only find dimensions for AP-270-MNT-H1 and AP-270-MNT-H3. why would aruba not provide this information?

chulcher (as employee and TME) provided the exact wireframe and dimensions of the H2 as I have it as PLM. I will work on getting the drilling template added to the H2 installation guide in the near future (as part of our collateral updates I hope), but that is as official and accurate as we will have. I can provide the STP directly should you need to prototype something. 

Yeah i cant confirm it ether. only the installation guide is available from Aruba and it has no dimensions too. 

Considering those details aren't from HPE, I'd not count on them being correct...nor does the mounting hardware have a processor.  Pretty sure those are the dimensions for the box.

The outside dimensions does not match the data sheet. in the data sheet it is 6.25x5 inches (158.75x127 mm).

Units are in millimeters.

We need to provide the dimensions of this mounting kit to our elevator contractor so they can layout the mounting points on the elevator while waiting for the devices to arrive but we could not find any documentation or template for AP-270-MNT-H2. we could only find dimensions for AP-270-MNT-H1 and AP-270-MNT-H3. why would aruba not provide this information?

Thank you for the confirmation. please send the STP it would also be of great help to us.

chulcher (as employee and TME) provided the exact wireframe and dimensions of the H2 as I have it as PLM. I will work on getting the drilling template added to the H2 installation guide in the near future (as part of our collateral updates I hope), but that is as official and accurate as we will have. I can provide the STP directly should you need to prototype something. 

Yeah i cant confirm it ether. only the installation guide is available from Aruba and it has no dimensions too. 

Considering those details aren't from HPE, I'd not count on them being correct...nor does the mounting hardware have a processor.  Pretty sure those are the dimensions for the box.

The outside dimensions does not match the data sheet. in the data sheet it is 6.25x5 inches (158.75x127 mm).

Units are in millimeters.

We need to provide the dimensions of this mounting kit to our elevator contractor so they can layout the mounting points on the elevator while waiting for the devices to arrive but we could not find any documentation or template for AP-270-MNT-H2. we could only find dimensions for AP-270-MNT-H1 and AP-270-MNT-H3. why would aruba not provide this information?

Attached a ZIP of the STP file for the H2 bracket.

Thank you for the confirmation. please send the STP it would also be of great help to us.

chulcher (as employee and TME) provided the exact wireframe and dimensions of the H2 as I have it as PLM. I will work on getting the drilling template added to the H2 installation guide in the near future (as part of our collateral updates I hope), but that is as official and accurate as we will have. I can provide the STP directly should you need to prototype something. 

Yeah i cant confirm it ether. only the installation guide is available from Aruba and it has no dimensions too. 

Considering those details aren't from HPE, I'd not count on them being correct...nor does the mounting hardware have a processor.  Pretty sure those are the dimensions for the box.

The outside dimensions does not match the data sheet. in the data sheet it is 6.25x5 inches (158.75x127 mm).

Units are in millimeters.

We need to provide the dimensions of this mounting kit to our elevator contractor so they can layout the mounting points on the elevator while waiting for the devices to arrive but we could not find any documentation or template for AP-270-MNT-H2. we could only find dimensions for AP-270-MNT-H1 and AP-270-MNT-H3. why would aruba not provide this information?