Wireless Access

Hi all,

 

I recently purchased several AP-367 outdoor AP's. They came with the standard mount which allows for pivoting on the vertical axis, but not horizontal. I'd like to mount the AP on a north facing wall, but point it north east. Does the AP keep the same broadcast pattern if I were to rotate the mount 90 degrees? Or would I need to get a different mount?

 

Thanks.

Hi,

 

You can have a small pole / arm where you can mount the AP. This can help you change the horizontal direction..

 

In a testing setup, I had the same challenge and I deployed the AP (rotated by 90 degrees). It worked properly knowing it is 90x90..However, I don't like how it will look so I prefer option 1.

 

Thanks for the info and for verifying it will work in a rotated
configuration. I don't really like it either, I'd think it would be worse
for water ingress. I'll look into your suggestion.

Thanks.

Thanks for the info everyone.

--
Confidentiality Notice

If the information in this email relates to an
individual or student, it may be

private data under state or federal
privacy laws. This individual private

data should not be reviewed,
distributed or copied by any person other than

the intended recipient(s),
unless otherwise permitted under law. If you are

not the intended
recipient, any further review, dissemination, distribution, or

copying of
this electronic communication or any attachment is strictly

prohibited. If
you have received an electronic communication in error, you

should
immediately return it to the sender and delete it from your system.

Thank
you for your compliance.