Wireless Access

 View Only
last person joined: 5 days ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP-565 version 10.x not using Radio Profile

This thread has been viewed 15 times

  • 1.  AP-565 version 10.x not using Radio Profile

    Posted Feb 22, 2024 04:12 AM

    Hi all,

    I have a scenario with AP-505 and AP-565 version 10.x Central Managed.

    I use a custom Radio Profile :

    • to limit Bandwith to 20 MHz for 2.4GHz and 5GHz and
    • to limit Channels of 5 GHz only to U-NII1 and U-NII2a : 36,40,44,48,52,56,60

    My issue is :

    • AP-505s work with the correct Bandwidth and channels
    • AP-565s use hiher channels (132, 149, etc ) and 80 MHz bandwith

    Is it the same for you?



  • 2.  RE: AP-565 version 10.x not using Radio Profile

    Posted Feb 22, 2024 06:24 AM

    Try chekcing the wifi specifications section of the datasheet for the 56X series. Also look for recommended best practices for RF.



    ------------------------------
    /AJ
    ------------------------------

    Original Message


  • 3.  RE: AP-565 version 10.x not using Radio Profile

    Posted Feb 22, 2024 07:58 AM

    In some parts of the world, the lower channels you configured are unsupported for outdoor use; so the AP-565 cannot use them.

    Here is an overview of allowed channels in different parts of the world.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


  • 4.  RE: AP-565 version 10.x not using Radio Profile

    Posted Aug 30, 2024 06:30 AM

    Hi All,

    thank you for your contribution.

    TAC helped me

    I see that AP-565s follows the following channels list

    If you set the AP-565 as indoor it works as AP-505.

    show ap allowed-channels

     

    Allowed Channels for AP Type 565 Country Code IT

    ------------------------------------------------

    PHY Type                  Allowed Channels

    --------                  ----------------

    2.4GHz (indoor)           1 2 3 4 5 6 7 8 9 10 11 12 13

    5GHz (indoor)             36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165

    2.4GHz (outdoor)          1 2 3 4 5 6 7 8 9 10 11 12 13

    5GHz (outdoor)            100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165

    2.4GHz 40MHz (indoor)     1-5 2-6 3-7 4-8 5-9 6-10 7-11 8-12 9-13

    5GHz 40MHz (indoor)       36-40 44-48 52-56 60-64 100-104 108-112 116-120 124-128 132-136 149-153 157-161

    2.4GHz 40MHz (outdoor)    1-5 2-6 3-7 4-8 5-9 6-10 7-11 8-12 9-13

    5GHz 40MHz (outdoor)      100-104 108-112 116-120 124-128 132-136 149-153 157-161

    5GHz 80MHz (indoor)       36-48 52-64 100-112 116-128 149-161

    5GHz 80MHz (outdoor)      100-112 116-128 149-161

    5GHz 160MHz (indoor)      None

    5GHz 160MHz (outdoor)     None

    5GHz (DFS)                52 56 60 64 100 104 108 112 116 120 124 128 132 136 140

    5GHz (ZWDFS)              disable


    Original Message