Wireless Access

Hi All 

Aruba Controllers are configured in VRRP as Active/Standby. Aruba OS version 8.10.0.12

I configured AP Fast Fail over through HA tab and configure LMS IP on Controller but its not working. 

I can see both controller IP on show ap database command but can't see HA configuration on standby Controller.

Any support or suggestions are highly appreciated

The suggestion is to not use AP Fast Failover. If you are wanting redundancy, either live with VRRP, LMS/B-LMS, or deploy as a cluster to get full seamless support.

Hi All 

Aruba Controllers are configured in VRRP as Active/Standby. Aruba OS version 8.10.0.12

I configured AP Fast Fail over through HA tab and configure LMS IP on Controller but its not working. 

I can see both controller IP on show ap database command but can't see HA configuration on standby Controller.

Any support or suggestions are highly appreciated

which is better VRRP or LMS/B-LMS for less failover time?

The suggestion is to not use AP Fast Failover. If you are wanting redundancy, either live with VRRP, LMS/B-LMS, or deploy as a cluster to get full seamless support.

Hi All 

Aruba Controllers are configured in VRRP as Active/Standby. Aruba OS version 8.10.0.12

I configured AP Fast Fail over through HA tab and configure LMS IP on Controller but its not working. 

I can see both controller IP on show ap database command but can't see HA configuration on standby Controller.

Any support or suggestions are highly appreciated

Hi Carson 

Thanks for clarifying. It is communicated to customer that it is not recommended but customer wants to test the feature. 

Customer requirement is to create minimal downtime during VRRP fail-over between controllers without having Mobility Conductor.

During VRRP fail over, the AP should fails over to the tunnel to the standby controller without reboot of the AP and the radios MUST stay active.

which is better VRRP or LMS/B-LMS for less failover time?

The suggestion is to not use AP Fast Failover. If you are wanting redundancy, either live with VRRP, LMS/B-LMS, or deploy as a cluster to get full seamless support.

Hi All 

Aruba Controllers are configured in VRRP as Active/Standby. Aruba OS version 8.10.0.12

I configured AP Fast Fail over through HA tab and configure LMS IP on Controller but its not working. 

I can see both controller IP on show ap database command but can't see HA configuration on standby Controller.

Any support or suggestions are highly appreciated

Well, that'd be AP high availability.

https://www.arubanetworks.com/techdocs/ArubaOS_8.12.0_Web_Help/Content/arubaos-solutions/vrrp/ap-high-avai-over.htm

Hi Carson 

Thanks for clarifying. It is communicated to customer that it is not recommended but customer wants to test the feature. 

Customer requirement is to create minimal downtime during VRRP fail-over between controllers without having Mobility Conductor.

During VRRP fail over, the AP should fails over to the tunnel to the standby controller without reboot of the AP and the radios MUST stay active.

which is better VRRP or LMS/B-LMS for less failover time?

The suggestion is to not use AP Fast Failover. If you are wanting redundancy, either live with VRRP, LMS/B-LMS, or deploy as a cluster to get full seamless support.

Hi All 

Aruba Controllers are configured in VRRP as Active/Standby. Aruba OS version 8.10.0.12

I configured AP Fast Fail over through HA tab and configure LMS IP on Controller but its not working. 

I can see both controller IP on show ap database command but can't see HA configuration on standby Controller.

Any support or suggestions are highly appreciated

Hi Chulcher 

thanks for replying. Even after configuring LMS and Backup LMS IP of Physical IP of controllers on Mobility Controller level AP bootstrap during VRRP fail-over, please suggest.

I need one more suggestion. can we configure Active/Standby Controller with Mobility Conductor and AP fast fail-over setup on Aruba OS8.

Well, that'd be AP high availability.

https://www.arubanetworks.com/techdocs/ArubaOS_8.12.0_Web_Help/Content/arubaos-solutions/vrrp/ap-high-avai-over.htm

Hi Carson 

Thanks for clarifying. It is communicated to customer that it is not recommended but customer wants to test the feature. 

Customer requirement is to create minimal downtime during VRRP fail-over between controllers without having Mobility Conductor.

During VRRP fail over, the AP should fails over to the tunnel to the standby controller without reboot of the AP and the radios MUST stay active.

which is better VRRP or LMS/B-LMS for less failover time?

The suggestion is to not use AP Fast Failover. If you are wanting redundancy, either live with VRRP, LMS/B-LMS, or deploy as a cluster to get full seamless support.

Hi All 

Aruba Controllers are configured in VRRP as Active/Standby. Aruba OS version 8.10.0.12

I configured AP Fast Fail over through HA tab and configure LMS IP on Controller but its not working. 

I can see both controller IP on show ap database command but can't see HA configuration on standby Controller.

Any support or suggestions are highly appreciated

which is better VRRP or LMS/B-LMS for less failover time?

The suggestion is to not use AP Fast Failover. If you are wanting redundancy, either live with VRRP, LMS/B-LMS, or deploy as a cluster to get full seamless support.

Hi All 

Aruba Controllers are configured in VRRP as Active/Standby. Aruba OS version 8.10.0.12

I configured AP Fast Fail over through HA tab and configure LMS IP on Controller but its not working. 

I can see both controller IP on show ap database command but can't see HA configuration on standby Controller.

Any support or suggestions are highly appreciated