Wireless Access

I install AP505 for 10 set. Now I assign 5 SSID with it. It work well. However, I need to create profile to fill with different SSID such as
1st profile = SSID 1-3  = use with AP 1-5
2nd profile = SSID 4-5 = use with AP 6-8
3rd profile = SSID 1,3,5 = use with AP 9-10

I can do it with aruba 6xxx model but for virtual controller , I can' find where is gui in a menu(attachment) for create profile and how to apply that profile to AP. Could anyone suggestion will be pleasure.

You need to take a look at zones, the topic is available in the user guide.

I install AP505 for 10 set. Now I assign 5 SSID with it. It work well. However, I need to create profile to fill with different SSID such as
1st profile = SSID 1-3  = use with AP 1-5
2nd profile = SSID 4-5 = use with AP 6-8
3rd profile = SSID 1,3,5 = use with AP 9-10

I can do it with aruba 6xxx model but for virtual controller , I can' find where is gui in a menu(attachment) for create profile and how to apply that profile to AP. Could anyone suggestion will be pleasure.

you can refer to Configuring Zone Settings on an Instant AP

You need to take a look at zones, the topic is available in the user guide.

I install AP505 for 10 set. Now I assign 5 SSID with it. It work well. However, I need to create profile to fill with different SSID such as
1st profile = SSID 1-3  = use with AP 1-5
2nd profile = SSID 4-5 = use with AP 6-8
3rd profile = SSID 1,3,5 = use with AP 9-10

I can do it with aruba 6xxx model but for virtual controller , I can' find where is gui in a menu(attachment) for create profile and how to apply that profile to AP. Could anyone suggestion will be pleasure.