Wireless Access

 View Only

  • 1.  AP635 and AP-534 system LED is solid amber

    Posted Jul 25, 2023 03:05 PM

    I have a new deployment of AP-635 and AP-534. The system LED is showing solid Amber. 

    May any one explain why i don't see a solid light.

    show ap tech-support ap-name IPF-04 | begin "Power Status"
    AP name "IPF-04" undefined.

    Power Status
    ------------
    Item                        Value
    ----                        -----
    Power Supply                : POE-AT
    LLDP Power                  : Successfully negotiated at 23.3W
    Current Operational State   : USB power disabled;  (Overridden by LLDP)
    Eth0 HW POE status          : POE AF, LLDP power: 23.3W
    Eth1 HW POE status          : NONE, LLDP power: 0.0W
    POE Mode                    : Shared



  • 2.  RE: AP635 and AP-534 system LED is solid amber

    Posted Jul 25, 2023 03:35 PM

    I am interested to see how Aruba responds to this. We were told a solid amber LED means the AP is on restrictive power. We use the 535 and the AP can use up to 60 watts POE from a switch if the switch could give that much power on a port. We understand that our AP-535 in restrictive mode is an AP-515, but I would like to see what the pros tell you about the amber light.


    Original Message


  • 3.  RE: AP635 and AP-534 system LED is solid amber

    Posted Jul 25, 2023 03:56 PM

    I did find this: https://community.arubanetworks.com/discussion/ap-535-restricted-power-mode?ReturnUrl=%2fcommunity-home%2fdigestviewer%3fcommunitykey%3d8c34e2c7-7b68-45d8-8b1a-0bed9c289a47


    Original Message


Related Content