Can you post the output of 'show ap bss-table'? Strange that an 11be WiFi-7 AP only broadcasts on 11n, unless 11be/ax/ac all are disabled.
Also, check if the AP has enough power, as one of the options to let the AP work on limited power is to reduce the radio performance (chains, power).
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your HPE Aruba Networking partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact HPE Aruba Networking TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or HPE Aruba Networking.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: May 10, 2025 01:02 PM
From: JL24
Subject: AP734 & AP‑ANT-348 makes max 11n/300mbps connection
Hello,
Got my first AP734 last Thursday and made some tests immediately with ANT-348. During tests noted that connection I can get is only 11n/300mbps max speed with 5G band and 40Mhz channel width. My testing laptop was about 5 meters away from antenna, signal level was around -48dbm and SNR >40db so no issues there I may say.
AP735 in same Central group running same configuration (naturally without external antenna config) gives 11ax and >600mbps with same config.
348 antenna was connected like this:
Antenna 1 => A0
Antenna 2 => A1
Antenna 3 => B0
Antenna 4 => B1
Any idea what could be issue here?
------------------------------
Jori Luoto
AV-IT Specialist
------------------------------