Please check/ask on the Instant ON forum. The 1930 is a different product line and specific knowledge is available there.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your HPE Aruba Networking partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact HPE Aruba Networking TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or HPE Aruba Networking.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Feb 17, 2025 09:06 AM
From: ektrontek
Subject: aruba 1930 48G setting
Thanks, is there example config which I can download?
Original Message:
Sent: 2/14/2025 5:18:00 AM
From: GorazdKikelj
Subject: RE: aruba 1930 48G setting
Go to InstantOn help center for all information you need on InstantOn product line.
InstantOn Documentation Home
Best, Gorazd
------------------------------
Gorazd Kikelj
MVP Guru 2025
Original Message:
Sent: Feb 07, 2025 08:29 AM
From: ektrontek
Subject: aruba 1930 48G setting
Thanks, how to setup the vlan setting, would it be possible to give suggestions?
vlan 1
name 'DEFAULT_VLAN"
untagged 1-52
Original Message:
Sent: 2/5/2025 11:44:00 AM
From: shpat
Subject: RE: aruba 1930 48G setting
Unfortunately not
------------------------------
Shpat | ACEP | ACMP | ACCP | ACDP |
-Just an Aruba enthusiast and contributor by cases
Original Message:
Sent: Feb 05, 2025 06:41 AM
From: ektrontek
Subject: aruba 1930 48G setting
Would it be possible to use it by command mode? Thanks.
Original Message:
Sent: 2/5/2025 12:02:00 AM
From: shpat
Subject: RE: aruba 1930 48G setting
Hi Ektrontek,
The 1930 48G is a InstantON Switch and can be Managed either through GUI or CloudApp (Aruba InstantON AP).
Here is a video on how to setup:
https://www.youtube.com/watch?v=nPkTflJyAUI&themeRefresh=1
and
https://www.youtube.com/watch?v=KWkIygL4MKo
------------------------------
Shpat | ACEP | ACMP | ACCP | ACDP |
-Just an Aruba enthusiast and contributor by cases
Original Message:
Sent: Feb 04, 2025 11:27 PM
From: ektrontek
Subject: aruba 1930 48G setting
hi,
In previous switch, I can use console to setup switch setting by putty, how can I do the way in aruba 1930 48G device? i don't find console port in the switch.
Thanks.