Wired Intelligent Edge

 View Only
Expand all | Collapse all

Aruba 3810 Ospf redistribution into bgp of External E2 routes

This thread has been viewed 9 times
  • 1.  Aruba 3810 Ospf redistribution into bgp of External E2 routes

    Posted Mar 18, 2020 09:45 AM

    Hi,

     

    We are looking to redistribute OSPF routes into BGP which has been successful except for a couple of external E2 OSPF routes, what is the procedure in Aruba OS version 16.05.11,

     

    we have tried to match on a route-map 

     

    match route-type external type-2

     

    but this has been unsuccessful our only solution is to use static routes and redistribute those, is there another solution like cisco to match the external?

     

    Thanks

     

    Dave

     

     

     

     



  • 2.  RE: Aruba 3810 Ospf redistribution into bgp of External E2 routes

    Posted Mar 19, 2020 11:04 AM

    Did you manage to redistribute all routes before configuring the route map?



  • 3.  RE: Aruba 3810 Ospf redistribution into bgp of External E2 routes

    Posted Mar 20, 2020 09:56 AM

    Hi,

     

    all the routes were redistributed except the external OE2, 

     

    then we tried the route map with no luck

    then we added the statics and redistributed them

     

    I take it Aruba does not have a command to match these routes like in Cisco?

     

    thanks

     

    Dave



  • 4.  RE: Aruba 3810 Ospf redistribution into bgp of External E2 routes

    Posted Sep 20, 2020 07:09 PM

    Hi ,

     

    Ref: https://support.hpe.com/hpesc/public/docDisplay?docId=mmr_kc-0129876

     

    The command "redistribute ospf" under "bgp router" only exports OSPF internal routes into BGP...

    Only way to do that in Aruba Switch OS is to use Network statement in BGP .