Configuration does not persist post v6 to v8 upgrade. Also, a backup from v6 will not restore on a v8 install.
You will have to replicate your v6 setting in v8 via cli/gui. Not all syntax is the same from v6 to v8. So this will most likely not be accomplished with a copy and paste of the backup config into the CLI.
---------------------------------
Dustin Burns
Lead Mobility Engineer @Worldcom Exchange, Inc.
ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022
If my post was useful accept solution and/or give kudos
---------------------------------
Original Message:
Sent: Feb 12, 2022
From: gjmallare
Subject: Aruba 7205 FW upgrade - Configuration lost
Hi All
Good day, we just upgraded our controllerr 7205 from 6.5 to 8.9, after the reboot, all of the configuration were lost (VLAN, SSID, License...etc) we tried restoring the back configuration but we are getting "invalid version" when restoring. We restored the back up to the 2nd flash and was able to restore our companies wireless service. How do we recover/restore the configuration to the 8.9 version, thanks
------------------------------
G. James Walther Mallare
------------------------------