Hello Guys,
i have been struggiling in deploying Aruba AOS CX LAB seems there is a lot of bugs including AOS CX VSX LAG and LACP blocking bugs, which i manage to get a workaround but i am having an issue between two Aruba CX switches over layer 3 interfaces there is not reachability when i start the LAB the i do have layer 3 communication between the VSX primary/secondary and the core layer and OSPF is up.
then 5 to 10 mins later OSPF is down and no reachabibility at all.
i am running AOS CX 10.13 version, i have tried 10.14 10.8, 10.7 and 10.6
Core-SW# show ip int br
Interface IP Address Interface Status
link/admin
1/1/1 192.168.2.1/30 up/up
1/1/2 192.168.2.101/30 up/up
1/1/3 192.168.3.101/30 up/up
Core-SW# ping 192.168.2.102
PING 192.168.2.102 (192.168.2.102) 100(128) bytes of data.
--- 192.168.2.102 ping statistics ---
5 packets transmitted, 0 received, 100% packet loss, time 4122ms
Core-SW# ping 192.168.3.102
PING 192.168.3.102 (192.168.3.102) 100(128) bytes of data.
--- 192.168.3.102 ping statistics ---
5 packets transmitted, 0 received, 100% packet loss, time 4113ms
VSX-Primary# show ip int br
Interface IP Address Interface Status
link/admin
1/1/5 192.168.2.102/30 up/up
VSX-Secondary# show ip int br
Interface IP Address Interface Status
link/admin
1/1/5 192.168.3.102/30 up/up