Cloud Managed Networks

 View Only

  • 1.  Aruba Central add Radiusserver to Configuration Group via API

    Posted May 07, 2025 06:26 AM

    Hello,

    i'm trying to add a Radiusserver to an Aruba Central Access Point configuration group, witch is a UI-group. I found this API Call where i can add an allready exiting radiusserver to a WLAN but not how to create a radiusserver for the group. 

    https://developer.arubanetworks.com/hpe-aruba-networking-central/reference/apifull_wlanupdate_wlan



  • 2.  RE: Aruba Central add Radiusserver to Configuration Group via API

    Posted May 08, 2025 03:00 AM

    AOS 8? AOS 10? Bridged SSID? Tunneled SSID?

    On Instant AOS8 or Bridged, there are no radius server groups. For a tunneled WLAN on AOS10, you would probably (not tested) need to create/modify the radius server group on the gateway. The WebUI may obfuscate this a bit because both AP and Gateway configuration is included in the same single workflow for a tunneled SSID, but RADIUS is happening on the gateway. The API handles configuration for AP and gateway separately.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your HPE Aruba Networking partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact HPE Aruba Networking TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or HPE Aruba Networking.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


  • 3.  RE: Aruba Central add Radiusserver to Configuration Group via API

    Posted May 08, 2025 03:27 AM

    Hello Hermann,

    Instant AOS8 and Bridged SSID.

    Maybee there is an missunderstanding. I like to add an new Radiusserver to a Aruba Central Configuration Group via the API but i can't find the API call or know if it is even possible? The following Screenshot shows which UI Settings i like to add/modifiy via API Calls. This Menue is Aruba Central under Configuration Group -> Access Point -> Security ->Authentication Servers.


    Original Message


  • 4.  RE: Aruba Central add Radiusserver to Configuration Group via API

    Posted May 20, 2025 10:57 PM

    perhaps you can this question from "Developer forum"



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------

    Original Message


Related Content