Cloud Managed Networks

 View Only

  • 1.  Aruba Central - How to upgrade Firmware on single device?

    Posted Oct 12, 2022 09:09 PM
    Hi Airheads,

    How do I upgrade the firmware on a single device in Central these days?

    When I follow the instructions in this link:

    Upgrading Devices

    I can't select "one or more devices from the device list", nor do I get the "Upgrade icon at the bottom of the page"?

    ------------------------------
    Regards,

    Brett V
    ------------------------------


  • 2.  RE: Aruba Central - How to upgrade Firmware on single device?

    Posted Oct 12, 2022 10:19 PM
    This should help you.
    https://www.arubanetworks.com/techdocs/central/latest/content/nms/maintenance/device-firmware-upgrade.htm

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
    ------------------------------

    Original Message


  • 3.  RE: Aruba Central - How to upgrade Firmware on single device?

    Posted Oct 12, 2022 10:52 PM
    Unfortunately that link only describes the process for switches in a group or at the global level. There is a reference to the link I posted above for individual devices, but it is not accurate for Central 2.5.5 at least. The options are no longer there to upgrade a device individually.

    ------------------------------
    Regards,

    Brett V
    ------------------------------

    Original Message


  • 4.  RE: Aruba Central - How to upgrade Firmware on single device?
    Best Answer

    Posted Oct 12, 2022 11:17 PM
    ok so basically you go to global->Firmware
    then select AP/Switch or gateway tab, then you hover your muse over it and click on the upgrade aup-arrow



    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
    ------------------------------

    Original Message


  • 5.  RE: Aruba Central - How to upgrade Firmware on single device?

    Posted Oct 12, 2022 11:27 PM
    OK I see the issue...

    I can only set the firmware on a single or selection of devices if firmware compliance hasn't been set at the group level. 



    I tested this on a switch that is a member of a group that doesn't have firmware compliance set and it the upgrade arrow appears just as it did in your screenshot.

    This makes sense - thanks heaps!

    ------------------------------
    Regards,

    Brett V
    ------------------------------

    Original Message


Related Content