Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Back to discussions
Expand all | Collapse all

aruba cx 6300 switch ip routing

This thread has been viewed 11 times

  • 1.  aruba cx 6300 switch ip routing

    Posted 15 days ago

    hello everyone

    i just want to confirm that is ip routing is enable by default on cx 6300 and if not than how to enable it for inter-vlan routing.



  • 2.  RE: aruba cx 6300 switch ip routing

    EMPLOYEE
    Posted 15 days ago

    yes ip routing is enabled by default. you can do "show ip route" and the switch will route berween connected vlan



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------

    Original Message


  • 3.  RE: aruba cx 6300 switch ip routing

    Posted 14 days ago

    okay but when i run the show ip route command. its show only default route which i was enter manual enter.. i also checked on show running  config  but didnt find ip routing.  


    Original Message


  • 4.  RE: aruba cx 6300 switch ip routing

    EMPLOYEE
    Posted 14 days ago

    the vlan interfaces should be up for it to be seen in ip routing table.



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------

    Original Message