I am migrating few customers from
ArubaOS-Switch to Aruba CX. It was common in old ArubaOS-Switch switches to configure voice vlans and assign QOS using these simple commands:
vlan xx
name "Voice_VLAN"
qos priority 6
voice
exit
is there any single command in Aruba CX that can assign certain CoS or DSCP value to all traffic in certain vlan?
I am not able to find a command to mark QoS values based on VLAN, the only command I found was per interface:
switch(config)# interface 1/1/1
switch(config-if)# qos trust none
switch(config-if)# qos cos 3
------------------------------
Ahmad Enaya
------------------------------