aruba 7010 AOS ArubaOS Version 8.6.0.4-2.2.0.7 (build 80444 / label #80444)
I Factory reset it , in cli cannot Login
how can i login it
Built by p4build@pr-hpn-build04 on 2021-06-07 at 03:48:21 UTC (gcc version 4.4.5)
(c) Copyright 2021 Hewlett Packard Enterprise Development LP.
<<<<< Welcome to Aruba Networks - Aruba A7010 >>>>>
[05:44:20]:Probing for EEPROM devices [ OK ]
[05:44:21]:Probing for real-time clock [ OK ]
[05:44:21]:Initializing LCD module [ OK ]
[05:44:21]:Uncompressing core image files [ OK ]
[05:45:14]:Extracting corefs [ OK ]
[05:45:16]:Enabling watchdog [ OK ]
[05:45:16]:Starting device manager
Performing eUSB Flash fast test... [ DONE ]
[ OK ]
[05:45:18]:Mounting flash [ OK ]
[05:45:19]:Initializing 511MB as swap on zRam0 [ OK ]
[05:45:22]:Turning swap ON on zRAM0 [ OK ]
PoE firmware [ OK ]
[05:45:28]:Checking system inventory [ OK ]
[05:45:28]:Installing ancillary FS [ OK ]
Performing integrity check on ancillary partition 0 [ OK ]
Extracting Webui files../
[05:45:55]:Reboot Cause: User reboot (Intent:cause:register 78:86:50:60)
[05:45:55]:Crash information available.
[05:45:55]:Starting syslog service [ OK ]
[05:45:57]:Deleting the Databases [ OK ]
[05:45:58]:Restoring the database [ OK ]
[05:45:59]:Generating SSH keys [ OK ]
[05:46:00]:Initializing TPM and certificates [ OK ]
[05:46:35]:Checking for configuration upgrade [ OK ]
[05:46:37]:Installing crash kernel [ OK ]
[05:46:37]:rcS Done(138 sec)
[05:46:37]:Starting OS services [ OK ]
Starting ztp
Starting ztp auto provision
Setting timezone to America/Los_Angeles
Starting auto provisioning
Registered for NTP Sync
Initiated DHCP, awaiting DHCP response
Auto-provisioning is in progress. It requires DHCP and Activate servers
Choose one of the following options to override or debug auto-provisioning...
'enable-debug' : Enable auto-provisioning debug logs
'disable-debug' : Disable auto-provisioning debug logs
'full-setup' : Start full setup dialog. Provides full customization
'static-activate' : Provides customization for static or PPPOE ip assignment. Uses activate for master information
Enter Option (partial string is acceptable):
Received DHCP response, My IP = 172.16.173.181, Master = none, Mask = 255.255.255.0, GW = 172.16.173.1, DNS = 172.16.173.2, Country code = none, Physical Port = 15
DNS server name 172.16.173.2 assigned to info structure..
No vendor option for DHCPv4, wait for DHCPv6 ....
Master info not received, trying activate
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 2630 0 0 100 2630 0 2834 --:--:-- --:--:-- --:--:-- 2834
Received Activate response, Central = device-prod2.central.arubanetworks.com
Master = auto-discovered from Activate
INFO: Backing up existing configuration directory.
Valid country code not specified, using default CA
Uplink Port : gigabitethernet 0/0/15
Adding gigabitethernet 0/0/15 as switchport to vlan 4094
Processes will restart now
Restarting cert_dwnld...
Processes restarted successfully!
[05:56:28]:Initializing GSM [ DONE ]
[05:56:28]:Initializing CCM [ DONE ]
[05:56:28]:Initializing FPAPPs [ DONE ]
[05:56:28]:Initializing CFGM [ DONE ]
[05:57:16]:Waiting for Controller IP [ DONE ]
[05:57:20]:Initializing AAA [ DONE ]
[05:57:20]:Initializing Controller management [ DONE ]
In process of syncing configuration with Central. User login configured from Central will be enabled after the sync. It may take some time.
User: