there are rate-limit commands that you can use under interface
int 1/1/10
rate-limit broadcast 170 pps
you can use "sh int 1/1/10 qos" to check it
------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
------------------------------
Original Message:
Sent: Sep 15, 2023 09:49 AM
From: miker
Subject: Arubacx 6300 rate limit
I see there is a qos command to rate limit broadcasts in Arubacx. But the documentation is not clear if 1) there is some sort of notification (logging) if rate limiting is happening and 2) is there a show command to see how much rate limiting is occurring?