Wired Intelligent Edge

Anyone got experience in bgp route reflector in ArubaOS-CX?

got a vsx cluster configuret and got 2 neighbors that i configured with route reflector client, but the routes switch B get for router A dont goes to switch C.

B is the RR and A & C i RR clients.

I can see all routes on B from A but nothing on C, i can see the BGP neighbor is up for both.

We run vrf but that shouldn't do anything.

Router A is a RR.

The only thing i can see is the neightbour x.x.x.x route-reflector-client command, do i need anything else? 

I can see in the bgp neighbor thats it says that C is a RR client but no routes is exchanged

Thx.

Hi,

What the use case ? EVPN ?

Can you share the configuration ?

Hi its just regular routing, we allready use iBGP in our environment

 added a simple topology on what im doing.

here's a sample of the config

router bgp X
bgp router-id X.X.X.X
timers bgp 30 90
!
vrf XXXX
bgp router-id X.X.X.X
neighbor X.X.X.X remote-as X
neighbor X.X.X.X password ciphertext XXXXXX
address-family ipv4 unicast
neighbor X.X.X.X activate
neighbor X.X.X.X route-reflector-client
exit-address-family

i think i found the issue, its a next hop self, see the routes in the bgp but they are not selected as they don't know the next hop, im trying to fix that with the next-hop-self cmd, ill update the post later.