Wired Intelligent Edge

 View Only
last person joined: 11 hours ago 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Expand all | Collapse all

ArubaOS-CX port-security

This thread has been viewed 14 times
  • 1.  ArubaOS-CX port-security

    Posted Jun 20, 2022 09:34 AM
    Hi community,

    Please help with cli on Aruba 6000 with ArubaOS-CX.
    How to configure port-security witch CLI ArubaOS-CX?

    On ArubaOS configuration:

    port-security x learn-mode static
    port-security x mac-address <mac-address>
    port-security x action send-disable

    How the same configure on ArubaOS-CX?


  • 2.  RE: ArubaOS-CX port-security

    Posted Jun 20, 2022 11:57 AM
    Hello PMHIWIG,

    You may test the following commands (andjust for your configuration accordingly. Please also check the security guide for the proper platform and proper software version the following is from 10.08 https://www.arubanetworks.com/techdocs/AOS-CX/10.08/HTML/security_6200-6300-6400/Content/Chp_Port_acc/Viol_infra_port_acc_sec_cmds/por-acc-sec-vio-act-fl-10.htm):
    switch(config)# port-access port-security enable

    Under the interface:
    switch(config-if)#port-access security violation action shutdown
    switch(config-if)# port-access port-security
    switch(config-if-port-security)# mac-address aa:bb:cc:dd:ee:ff

    Hope this helps!