Community Feedback

 View Only

  • 1.  ArubaS2500 loosing connection on management interface

    Posted Aug 29, 2022 02:03 PM
    I have been running my ArubaS2500-24P-US with out any problems for a little over 2 years now. I need to make a change to a vlan and log in with the web interface. As I was going to configuration a message popped up saying cant query networkerror. A refresh cleared the error and I was able to continue as I moved around I saw this happen a few more times. I tried this from another machine and saw the same issue. I logged in with SSH and while I got connected after a few minutes I lost connection.

    This is a strange one as normal network activity is fine and its just accessing the management interface. Not sure how to trouble shoot this one I was looking in wireshare and saw that I was getting frame errors initiates the connection closing


  • 2.  RE: ArubaS2500 loosing connection on management interface

    Posted Aug 30, 2022 03:29 AM
    Do you have an IP address on the production VLAN? You may be able to connect to that over a normal port instead of the management port and use the web interface or SSH. Note that the web interface on the S2500 is quite limited, and if what you want to do can be done that is fine, but some changes are only possible over SSH/Serial console.

    How do you connect to the management port? UTP Cross cable? Or is the management port connected to another switch?

    Using the serial console may be another alternative. Also frame errors may have to do with a bad cable.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


  • 3.  RE: ArubaS2500 loosing connection on management interface

    Posted Aug 31, 2022 11:22 PM

    Thanks for the feedback, Yes the switch has a ip address set 10.10.10.0/24 on vlan 10, I am on a client address space of 10.10.50.0/24 on a client vlan called 50 I am connecting over a network port rather than a management port.

    The switch just has some very basic vlans on it nothing special., I was thinking it was web interface bug but moved to SSH and the connection locked up on me twice.

    What firmware version should I be running ? This is in a non production network . Happy to post some logs and packet traces showing the closed ports.


    Original Message


Related Content