Wired Intelligent Edge

 View Only
  • 1.  bgp route-limit

    Posted Jun 03, 2011 01:08 AM
    Hello, I have the following problem. By the documentation I can restrict the limit of bgp routes by command: peer IP_ADDRESS route-limit 5000 alert-only I need it because bgp is eating all limits and I cannot add a new route without removing any current route. When I simply perform the command "peer IP_ADDRESS route-limit 5000" the connection is being dropped with a peer as it reaches 5000 routes. But I cannot perform the command "peer IP_ADDRESS route-limit 5000 alert-only" because my hp swtich doesn't have it. peer IP_ADDRESS route-limit ? INTEGER1-12288 Route limit value peer IP_ADDRESS route-limit 5000 ? INTEGER1-100 Start to generate warning messages if it reaches maximum percentage value cr peer IP_ADDRESS route-limit 5000 90 ? cr ++++++++++++++++++++++++++++++++++++++++ HP E4800G Switch ++++++++++++++++++++++++++++++++++++++++ DEVICE_NAME : 3CRS48G-24-91 ... VENDOR_NAME : 3COM ++++++++++++++++++++++++++++++++++++++++ s4800g-cmw520-r2102p02.bin Have you seen this problem?


  • 2.  RE: bgp route-limit

    Posted Jun 06, 2011 04:15 AM


  • 3.  RE: bgp route-limit

    Posted Jun 13, 2011 08:31 PM
    This software isn't working for our switch. 3com4800g doesn't want to boot with it.


  • 4.  RE: bgp route-limit

    Posted Jun 14, 2011 09:14 AM

    Can you paste the error? And; did you upgrade the bootloader first?



  • 5.  RE: bgp route-limit

    Posted Jun 14, 2011 07:10 PM
    Hello, I uploaded the recommended OS at the hp switch s5500ei-cmw520-r2208-s168.bin and configured the booting from this OS in the next time: The current boot app is: flash:/s4800g-cmw520-r2102p02.bin The main boot app is: flash:/s5500ei-cmw520-r2208-s168.bin The backup boot app is: flash:/s4800g-cmw520-r2102p02.bin When I connected to hp via console I didn't see errors, hp switch just was restarting all time.