Controllerless Networks

 View Only
Back to discussions
Expand all | Collapse all

BLE beacons of IAP315 / Change UUID, Major and Minor

This thread has been viewed 10 times

  • 1.  BLE beacons of IAP315 / Change UUID, Major and Minor

    Posted Feb 08, 2019 10:46 AM

    My dear Aruba friends,

     

    were are currently running 50 IAP315 in controllerless mode (so one of the IAPs is the master). The firmware is 8.4.0.0.

     

    All of the BLE devices in the IAPs show the same UUID with Major and Minor set to 0.

     

    When I try to change these values via the CLI using

    ble-configure cfg-ble-mac D4:36:39:81:8A:AC uuid 1000

    there is no error message. A commit apply produces no error message es well, but the AP in question still shows the same major as the master AP. Even a cange of the Major on the master AP does not function.

    Am I doing anything wrong or is there a bug in the firmware?

     

    Your help is higly appreciated.

     

    Best regards

     

      Andreas

     



  • 2.  RE: BLE beacons of IAP315 / Change UUID, Major and Minor

    Posted Feb 13, 2019 07:31 AM

    The AP built-in beacons should be configured with the Meridian Beacons App and the Meridian platform. I don't know the command, but as far as I know the only way is via the App.



Related Content