Controllerless Networks

Hi guys, I'm very new with ArubaOS & InstantAP networks.

Frankly speaking, today was the first day of my experience with that.

What I've done: two 225's (one of them set as preferred Master) and six 215's were connected to one L2 segment. All ports are tagged by VLAN 3050 for Wifi-Guest access and untagged by VLAN 3077 as for WiFi-Enterprise access. Sure, with RADIUS server in the same network (192.168.32.0/22)

And yestreday all APs were shown in Instant WebGUI. And authorize  client's requests.

But problem number one - all of cliens (from 8 to 17 at peak) shown as a clients of only one, Master, IAP (225). I thought it wasn't a relly big trouble.

But today only a Master IAP 225 shows both SSID in air, and none of other IAPs.

Plus, two of them aren't shows in Instant WebGUI rather than yesterday. One is 225 and one is 215.

ArubaOS: 6.4.2.0-4.1.1.1_46936

None of certificates were imported.

Single MacOS client is running on Master IAP without any troubles in authorisation or whatsoever.

Please take a look, guys! What is wrong below?

Attachment(s)

Vasik_conf.txt   3 KB 1 version

o_O there are two Masters in the same segment of LAN.

Now all IAPs are visible! But only 225's are using for clients connection, non of 215's made so... 

Is this a big problem or it should be different?

Gotcha!

There is an issue with allowed in 215 channel in RU code list:

Allowed Channels for AP Type 215 Country Code RU
------------------------------------------------
PHY Type Allowed Channels
-------- ----------------
802.11g (indoor) None
802.11a (indoor) None
802.11g (outdoor) None
802.11a (outdoor) None
802.11g 40MHz (indoor) None
802.11a 40MHz (indoor) None
802.11g 40MHz (outdoor) None
802.11a 40MHz (outdoor) None
802.11a 80MHz (indoor) None
802.11a 80MHz (outdoor) None
802.11a (DFS) None

But not only with RU, e.g. AE still "None" for every channel...

Trying to investigate certified lists...

All done by changing country to CN!

Full of joy, Happy NY 'n Merry XMAS!