When you 'hover on/move your mouse on' the warning symbol, do you see anything more information?
Do the MM logs show anything just after you failed to upload the image?
As an alternative you could manually upgrade the controller(s), or open a TAC Support case.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Mar 17, 2023 03:45 AM
From: tigerbt
Subject: Can't load AOS image for controller on Aruba Conductor 8.10.0.5
Hi all,
I'm facing an issue in that I can't upload an AOS image for the controller on the MM (preparing to upgrade the controllers).
The controller is AOS 8.10.0.2
The MM is AOS 8.10.0.5
It's working properly with my lab MM, but with my production MM It isn't.
Both MMs are the same version.
Anyone else has this problem or knows about it?
Thanks for your reply.