Security

 View Only
last person joined: yesterday 

Forum to discuss Enterprise security using HPE Aruba Networking NAC solutions (ClearPass), Introspect, VIA, 360 Security Exchange, Extensions, and Policy Enforcement Firewall (PEF).
Back to discussions
Expand all | Collapse all

ClearPass and Check Point integration - still not working

This thread has been viewed 12 times

  • 1.  ClearPass and Check Point integration - still not working

    Posted Jul 13, 2022 01:42 PM
    Hi everyone,

    I'm following the (old) guide about integrating the authentications to ClearPass in order to have logs on my Check Point cluster firewall, but I still cannot see any log in or log off action.
    ClearPass: 6.7.0.101814
    CheckPoint: cluster of 2 R80.40

    I've double checked all the steps and configurations, everything looks right like in the document.
    Users can connect to the wifi SSID but I can't see their login in the CP CLI (pdp command).
    Is this a problem on the firewall or on clearpass?

    Do anyone have a working configuration to post to check if I made a mistake?

    thanks!


  • 2.  RE: ClearPass and Check Point integration - still not working

    EMPLOYEE
    Posted Jul 22, 2022 09:52 PM
    clearpass 6.7.x is end of support, so you need to upgrade to at least 6.9.x

    here is the checkpoint integration guide with clearpass 6.9.1
    https://support.hpe.com/hpesc/public/docDisplay?docId=a00101500en_us

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
    ------------------------------

    Original Message