Wireless Access

I have ArubaOS (MODEL: 535), Version 8.6.0.4.

I understand that 802.11ax and 160 MHz settings are not yet supported in the GUI, so I'm working from CLI.

I learned that the AP-535 does not support contiguous 160 MHz channels, but will operate with 80+80 non-contiguous.

arm
 wide-bands 5ghz
 80mhz-support
 160mhz-support non-contiguous-only

I'm able to set a single 80 MHz channel (I've tried 100E and 116E, but I do not see the 80+80). Is there another configuration setting needed to enable 80+80 non-contiguous?

Anyone using an AP-535 with insights on this configuration?

What is your regulatory domain?

This is in US Domain.

80 MHz channels can be individually configured throughout the DFS range, but I cannot find the setting for enabling 80+80 non-contiguous.

I don't see the AP-555 allowed for any 160mhz channels in the US regulatory domain.

(ArubaMM-VA) *[mynode] #show ap allowed-channels country-code US ap-type ap-555

Allowed Channels for AP Type ap-555 Country Code "US" Country "United States"
-----------------------------------------------------------------------------
PHY Type                  Allowed Channels
--------                  ----------------
802.11g (indoor)          1 2 3 4 5 6 7 8 9 10 11
802.11a (indoor)          36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 144 149 153 157 161 165
802.11g (outdoor)         1 2 3 4 5 6 7 8 9 10 11
802.11a (outdoor)         36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 144 149 153 157 161 165
802.11g 40MHz (indoor)    1-5 2-6 3-7 4-8 5-9 6-10 7-11
802.11a 40MHz (indoor)    36-40 44-48 52-56 60-64 100-104 108-112 116-120 124-128 132-136 140-144 149-153 157-161
802.11g 40MHz (outdoor)   1-5 2-6 3-7 4-8 5-9 6-10 7-11
802.11a 40MHz (outdoor)   36-40 44-48 52-56 60-64 100-104 108-112 116-120 124-128 132-136 140-144 149-153 157-161
802.11a 80MHz (indoor)    36-48 52-64 100-112 116-128 132-144 149-161
802.11a 80MHz (outdoor)   36-48 52-64 100-112 116-128 132-144 149-161
802.11a 160MHz (indoor)   None
802.11a 160MHz (outdoor)  None
802.11a (DFS)             52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 144

I don't know about AP-555, but I have AP-535.

My understanding is it will support two 80 MHz non-contiguous channels for 802.11ax.  It won't show it as an available 160 MHz channel because it doesn't support 160 MHz width in a single channel.